How To Format Hard Drive For Mac
• If the Mac Pro is running, shut it down before proceeding. • Disconnect any cables that are connected to the Mac Pro, except the power cord. The power cord must be connected, so you can discharge any static buildup through the power cord and into its grounded outlet. • Discharge any static electricity that has built up on your body by touching the PCI expansion slot cover plates. You'll find these metal plates on the back of the Mac Pro, next to the DVI video connectors for the display. You may feel a slight static shock when you touch the metal cover plates.
Format Hard Drive (Mac) 1. Connect the external hard drive to the computer. Click Go on the top tool bar, and select Utilities. Open Disk Utility. Select the external hard drive on the left-hand side. Click the Partition tab. Change the Partition Layout from Current to 1 Partition. Conversely, you can format the HD to HFS+ and use HFSExplorer for Windows to read and write to the Mac-formatted hard drive. To get started, you'll first have to format the hard drive from NTFS to.
This is normal; there's no need to be concerned for yourself or the Mac Pro. • Remove the power cord from the Mac Pro. • Ensure that the access latch on the back of the Mac Pro is in the up position. The access latch not only locks the access panel, it also locks the hard drive sleds in place. If the latch isn't up, you won't be able to insert or remove a hard drive sled. • Pick the hard drive sled you want to use.
The sleds are numbered one through four, with the number one sled near the front of the Mac Pro, and the number four sled at the rear. There is no significance to the positions or numbers, except that Apple uses the number one sled as the default location for a hard drive installation. This might seem tricky the first time you do it. Just let your fingers curl around the bottom of the sled, and then pull it towards you. • Now that the new hard drive is attached to the sled, align the sled with the drive bay opening and gently push the sled into place, so that it's flush with the other sleds.
How To Format Hard Drive For Mac Only
• To reinstall the access panel, put the bottom of the panel into the Mac Pro, so that the set of tabs on the bottom of the panel catch the lip at the bottom of the Mac Pro. Once everything is aligned, tilt the panel up and into position.
• Close the access latch on the back of the Mac Pro. This will lock the hard drive sleds in place, as well as lock the access panel.
• Type fdisk /dev/sd x (replacing x with your drive letter) • Type d to proceed to delete a partition • Type 1 to select the 1st partition and press enter • Type d to proceed to delete another partition (fdisk should automatically select the second partition) B. The last step is to create the fat filesystem. How to format hard drive for mac. Next we need to create the new partition. • Type n to make a new partition • Type p to make this partition primary and press enter • Type 1 to make this the first partition and then press enter • Press enter to accept the default first cylinder • Press enter again to accept the default last cylinder • Type w to write the new partition information to the USB key • Type umount /dev/sd x1 (replacing x with your drive letter) C.